Radio Systems CT-2002 Instructions d'exploitation télécharger pdf (Page 23)

FOR MASTER TIME SYNC VIA TOP-of-HOUR RESET

wire timer displays Top-of-Hour in for accurate time readout.

Note: T.O.H. input must be used to offset timer by one or more

seconds. Use IR remote control progam option 10 consult

manual page 11 for more information.

SERIAL INPUT

TERMINATION

RJ-45 OUT

RJ-45 IN

GND

+15V DC IN

RJ-45 SHIELD TO GND

GND

SERIAL OUT -

SERIAL OUT +

GND

START SWITCH

STOP SWITCH

RESET SWITCH

MODE SWITCH

GND

TIME CLOSURE 1

TIME CLOSURE 2

TIME CLOSURE 3

TIME CLOSURE 4

GND

DOWN TIME CLOSURE AT “0”

TOH RESET INPUT

RJ-45 OUT

RJ-45 IN

9V DC IN

MODEL CT-2002 DESKTOP Part No. 14409

SERIAL IN +

SERIAL IN -

RJ-45 SHIELD TO GND

Logan Township, New Jersey USA

1-856-467-8000 • www.radiosystems.com

CT-2002 4” & 2” or Desktop (Desktop Shown)

GND

SERIAL OUT -

SERIAL OUT +

GND

START SWITCH

STOP SWITCH

RESET SWITCH

MODE SWITCH

GND

TIME CLOSURE 1

TIME CLOSURE 2

TIME CLOSURE 3

TIME CLOSURE 4

GND

DOWN TIME CLOSURE AT “0”

TOH RESET INPUT

RJ-45 OUT

RJ-45 IN

9V DC IN

MODEL CT-2002 DESKTOP Part No. 14409

SERIAL IN +

SERIAL IN -

RJ-45 SHIELD TO GND

Logan Township, New Jersey USA

1-856-467-8000 • www.radiosystems.com

CT-2002 4” & 2” or Desktop (Desktop Shown)

Ancillary I/O

16- Ground

17- Down Time Closure at “0”

18- Top-of-Hour Input

19- Ground

20- +15V DC

Remote Control

6- Ground

7- Start

8- Stop

9- Reset

10- Mode

Clock Triggers

11- Ground

12- Time Closure #1

13- Time Closure #2

14- Time Closure #3

15- Time Closure #4

Serial Synchronizing Data

1- Serial In +

2- Serial In -

3- Ground

4- Serial Out -

5- Serial Out +

REMOTE CONTROL BARRIER STRIP PIN-OUTS

CT-2002 Large

FOR MASTER TIME SYNC VIA RADIO SYSTEMS or SMPTE SERIAL DATA

wire timer displays serial in with Radio Systems or SMPTE Time-of-Day

serial input for accurate time readout. Accurate time will be read by all

serially connected displays. Time may be offset by one or more hours

- use IR remote control progam option 4 consult manual page 10 for

more information.

Use a straight thru RJ-45 patch cable (from either RJ-45 connector) if

this clock is being fed with remote master time sync and if downstream

displays are not required to display remote timer information.

Repeat up to 35 displays.

Note: final display serial line must be terminated with a

150Ω resisitor (use terminator DIP switch on large clock.)

Use a crossover RJ-45 patch cable to slave Time-of-Day

and/or timer displays to downstream units.

Via the IR remote control enter the program mode and select option 3 for serial

time-of-day format. Select “rs1” for time-of-day only re-display from the master

clock. Select “rs2” for time-of-day and timer re-display from the master clock.

You must use a crossover RJ-45 patch cable if this display is the

master (first clock) in the serial chain or, if you want downstream

clockcs to display remote timer as well as Time-of-Day

PC Clock Input Sync

Note: Software/hardware

kit available (Radio Systems

part # 16117) to update

Windows PC clocks via USB

from the CT-2002

serial data stream

Radio Systems, Inc. CT2002 Manual

Page 23

Serial Clock/Timer Connections between CT2002 stand-alone Models

Master/Slave Interconnection via RJ-45 Patch Cable Connections

Straight thru (Time-of-Day only)

RJ-45 Display Cable.

Crossover (Time-of-Day and Timer)

RJ-45 Display Cable.

RJ-45 Patch Cord Wiring

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Radio Systems CT-2002 Instructions d'exploitation Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Minuteries électriques Radio Systems CT-2002